ICP DAS USA WISE-2841M Series User Manual page 91

ICP DAS WISE User Manual
 To modify the settings of the starting address, quantity or
Read/Write authority, please click on the setting block to perform
the modification. The user could also modify Type, Scale Ratio,
Offset, and Read/Write authority on this interface. The Scale Ratio
setting and Offset setting allows to transform the Holding Register
value in this block by linear transformation. The formula is as
follow:
Transformed Value = Scale Ratio x Input Register value + Offset
After the linear transformation, the Transformed Value will be saved
in floating point format on the WISE (no matter what format the raw
Holding Register value was in the device). The default Scale Ratio
will be 1 and the default Offset is 0, indicating not using linear
transformation. The Read/Write authority is for user to enable or
disable the Read/Write capability for the address block of the
module.
 If the user wants to assign a Nickname for the address blocks, the
user can click on the "Nickname Setting" tab, and then input the
Nickname for each address block. The Nickname will be shown in
the "Channel Status" and "Rule Setting" pages.
http://wise.icpdas.com
91