Table of Contents
Advertisement
ICP DAS WISE User Manual
8.5 IoTstar Connection Setting
The section is for user to complete
and IoTstar or "ICP DAS IoTstar Trial
below for the setting:
i Click "Enable" of the "Function Status" field to enable the connection
to IoTstar.
ii Two options : "User-built IoTstar" and "IoTstar Trial" are available for
selection.
If
field, then input the IP address or Domain Name of the PC or Platform
(with IoTstar installed). Enter the login username and password in the
"Username" and "Password" fields. WISE will login and connect to the
IoTstar by the information provided.
If users want the WISE to connect the "IoTstar Trial", please click
the login username and password (require to apply in advance) in the
"Username" and "Password" fields. WISE will login and connect to the
"IoTstar Trial" by the information provided.
Please Note: For the account application of the "IoTstar Trial", please
http://wise.icpdas.com
users
select
Figure 8-28：IoTstar Connection Setting Page(1)
the connection setting between WISE
Service". Please follow the steps
"User-built
IoTstar",
in the "Server Address"
in the "Server Address" field, then enter
please
click
144
Advertisement
Table of Contents
