Figure 10-37：Infrared Action Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
iv Specify the "Execution Frequency" to be "One Time" or
v Click "OK" button to confirm the settings and return to the
10.2.1.4
User can execute an action in ICP DAS IR module in THEN/ELSE
Action statement; the editing page for Infrared Action is shown as
follow:
Follow the steps below:
i
http://wise.icpdas.com
dropdown list to specify which value will be used.
Please Note: The content of received MQTT subscribe
topic or AWS / Azure / Bluemix parameter must be a
number, otherwise 0 will be assigned.
"Repeat". Please refer to
for detail.
Rule settings page.
Infrared
Figure 10-37：Infrared action setting page
Select the IR module from the dropdown list of the "Module"
section.
"10.2 THEN/ELSE Action
Setting"
228