Table of Contents
Advertisement
ICP DAS WISE User Manual
value encoded string will be displayed as below for user to check if the
setting is appropriate (please refer to the figure as below).
After all settings are completed, click "OK" button to return to the
vi
User-Defined Data Logger list page.
vii Repeat steps i~vi to complete settings of all User-Defined Data Logger.
viii To modify the settings of a pre-set User-Defined Data Logger, please
click on the radio button in front of the User-Defined Data Logger, and
then click on "Setting" to modify the settings.
ix
To copy the settings of a pre-set User-Defined Data Logger to the new
User-Defined Data Logger, please click the radio button in front of the
pre-set User-Defined Data Logger and then click "Copy", a new
User-Defined Data Logger (in sequence) will be added to the list and
the settings of the old User-Defined Data Logger will be copied to this
newly added User-Defined Data Logger.
x
To remove a pre-set User-Defined Data Logger, please click the radio
button in front of the pre-set User-Defined Data Logger and then click
"Remove".
xi
After all User-Defined Data Logger settings are completed, click
"Save" button to save the changes.
7.3 MQTT Data Logger Setting
The MQTT Data Logger allows to record the message content of the Topics
which WISE subscribe from the MQTT broker, the setting page is shown as
below:
http://wise.icpdas.com
Figure 7-8：The view interface of Real-time Variable Editor
111
Advertisement
Table of Contents
