Figure 10-59：Data Logger Action Setting Page; Figure 10-60：Snmp Trap Action Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
10.2.11 Data Logger
You can execute "One-Time Log" in the Action statements to perform data
recording one-time only when an event is triggered. The setting page is
show as below:
Follow the steps below:
i In the "Data Logger" field, specify the data logger you want to
execute in Action (one-time data recording) from the dropdown list.
ii Click "OK" button to confirm the settings and return to the Rule
settings page.
10.2.12 SNMP Trap
You can send a specific SNMP Trap when executing a THEN/ELSE Action
statement. The setting page is show as below:
Follow the steps below:
i In the "Agent" and "Trap" field, specify the SNMP Trap you want to
execute in Action from the dropdown list. The selected SNMP Trap
message content will be displayed for you to verify if this is the
SNMP Trap you want to send.
ii Click "OK" button to confirm the settings and return to the Rule
settings page.
http://wise.icpdas.com
Figure 10-59：Data Logger action setting page
Figure 10-60：SNMP Trap action setting page
242