ICP DAS WISE User Manual
After all settings of the channels are completed, click "OK" button to
return to XV-Board Setting page.
6.1.4 XV-Board AO Channel Settings
The XV-Board AO Channel Setting page is shown as follow (using
XV310 as an example):
The settings are as follow:
Nickname: For user to define nicknames for each I/O channel,
Type: Select the output signal type of the AO channel from the
Power On Value: You can set the initial value of the AO channel
After all settings of the channels are completed, click "OK" button to
return to XV-Board Setting page.
6.2 Remote I-7000/DL DCON Module Setting
WISE allows connections to ICP DAS I-7000/DL DCON modules. The I/O
Module Setting page allows users to add I-7000/DL DCON modules that
are connected to the WISE to the list. After the module is added, it allows to
set up the configuration of the I/O module. The setting page is shown as
below:
http://wise.icpdas.com
Figure 6-6:XV-Board AO Channel Setting Page
these nicknames will be displayed on the "Channel Status" and
"Rule Setting" pages.
dropdown list.
in the "Power On Value" field. The default initial value is 0.
61