Figure 6-52：Icam Ip Camera Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
order (increase the index number (No.)).
 Copy: To copy the settings of a pre-set iCAM IP Camera to the new
iCAM IP Camera, please click the radio button in front of the pre-set
iCAM IP Camera and then click on "Copy", a new iCAM IP Camera
(in sequence) will be added to the list and the settings of the old
iCAM IP Camera will be copied to this newly added iCAM IP
Camera.
 Remove: Click the radio button in front of the iCAM IP Camera and
click on "Remove" to remove the selected iCAM IP Camera.
After all settings are completed, click "Save" button to save the changes.
The following will describe the setting of ICP DAS iCAM IP Camera.
6.9.1 The Setting of iCAM IP Camera(WISE)
The ICP DAS iCAM IP Camera setting interface is shown as below
(using iCAM-MR6322 as an example):
The settings are as below:
 Nickname: For user to define nickname for the IP Camera, the
nickname will be displayed on the "IP Camera Status" and "Rule
Setting" pages.
 Description: The Description field provides a space for the user to
make a brief description of this IP Camera.
http://wise.icpdas.com
Figure 6-52：iCAM IP Camera Setting page
98