Advertisement
Quick Links
Thank you for purchasing WISE-580x – the Intelligent Data Logger PAC controller
for remote monitoring and control application. This Quick Start Guide will provide
you with minimum information to get started with WISE-580x. It is intended for use
only as a quick reference. For more detailed information and procedures, please
refer to the full user manual on the CD included in this package.
In addition to this guide, the package includes the following items:
WISE-580x
Series Module
WISE-580x User Manual
CD:\WISE-580x\document\User Manual\
http://ftp.icpdas.com/pub/cd/wise_cd/wise-580x/document/user manual/
WISE Website
http://wise.icpdas.com/index.html
ICP DAS Website
http://www.icpdas.com/
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved.
Software
2G microSD
Utility CD
card
Quick Start Guide for
WISE-580x Series
June 2011, Version 1.0
RS-232 cable
(CA-0910)
E-mail: service@icpdas.com
Screw Driver
(1C016)
1
Advertisement
Related Manuals for ICP DAS USA WISE-580 Series
Summary of Contents for ICP DAS USA WISE-580 Series
- Page 1 Quick Start Guide for WISE-580x Series June 2011, Version 1.0 Thank you for purchasing WISE-580x – the Intelligent Data Logger PAC controller for remote monitoring and control application. This Quick Start Guide will provide you with minimum information to get started with WISE-580x. It is intended for use only as a quick reference.
- Page 2 -------------------------------------------- Configuring Boot Mode Make sure the “Lock“ switch placed in the “OFF” position, and the “Init’ switch placed in the “OFF” position. --------------------------------------------------------------------- Connecting to PC, Network and Power The WISE-580x is equipped with an RJ-45 Ethernet port for connection to an Ethernet hub/switch and PC.
- Page 3 ----------------------------------------------------- Installing the MiniOS7 Utility Step 1: Get the MiniOS7 Utility The MiniOS7 Utility can be obtained from companion CD or our FTP site: CD:\Tools\MiniOS7 Utility\ ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/minios7/utility/minios7_utility/ Please download version v3.2.4 or later. Step 2: Follow the prompts to complete the installation MiniOS7 Utility Ver 3.24 After the installation has been completed, there will be a new short-cut for MiniOS7...
- Page 4 Step 1: Run the MiniOS7 Utility Double-click the MiniOS7 Utility shortcut on your desktop. Step 2: Press “F12” or choose “Search” from the “Connection” menu After pressing F12 or choosing “Search” from “Connection” menu, the MiniOS7 Scan dialog will appear, that will display a list of all the MiniOS7 modules on your network.
- Page 5 Step 3: Choose the module name and then choose “IP setting” from the toolbar Choose the module name for fields in the list, and then choose IP setting from the toolbar. Step 4: Assign a new IP address and then choose “Set” button Step 5: Choose “Yes”...
- Page 6 ---------------------------------------------------------------------------------- Go to WISE-580x Web Site to edit Control Logic Please follow the steps below to implement IF-THEN-ELSE control logic on controllers: Step 1: Open a browser, and type in the URL address of the WISE-580x Open a browser (recommended using Internet Explorer, new version is better). Type in the URL address of the WISE-580x module in the address bar.
- Page 7 WISE-580x 系列快速安裝指南 June 2011, Version 1.0 歡迎使用 WISE-580x 快速安裝指南 感謝您購買 WISE-580x系列控制器：多功能智慧型資料記錄(Data Logger) PAC控制器。本 『快速安裝指南』 提供 WISE-580x系列安裝入門所需資訊, 如 需更詳細的安裝及使用說明, 請參閱更完整的使用手冊。 產品內容 除了本『快速安裝指南』外, 此產品內容還包括以下配件: 軟體工具光碟 螺絲起子 RS-232 纜線 WISE-580x 2G microSD 模組 記憶卡 (CA-0910) (1C016) 技術支援 WISE-580x User Manual CD:\WISE-580x\document\User Manual\ http://ftp.icpdas.com/pub/cd/wise_cd/wise-580x/document/user manual/ ...
- Page 8 -------------------------------------------- 檢視啟動模式 確認指撥開關 Lock 的位置在 ”OFF”，Init 的位置在“OFF”。 --------------------------------------------- 連接主機、網路及電源 WISE-580x 系列配有標準的網路接口 RJ-45，可透過網路集線器/交換器與 PC 連接, 也可直接連到 PC 的網路接口。 WISE-580x Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com...
- Page 9 --------------------------------------- 安裝 MiniOS7 Utility 步驟一: 取得 MiniOS7 Utility MiniOS7 Utility 可取自隨附的光碟或 FTP: CD:\Tools\MiniOS7 Utility\ ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/minios7/utility/minios7_utility/ 請下載 v3.2.4 以後的版本。 步驟二: 按照命令提示完成安裝 MiniOS7 Utility Ver 3.24 安裝完成後, 桌面上將會出現 MiniOS7 Utility 的捷徑圖示 ----------------------------------------------------------- 啟動 MiniOS7 Utility 設定 IP 位址 WISE-580x 系列模組在出廠時會統一預設網路設定值，使用者可以依照下列 步驟自行變更網路設定。WISE 模組的網路出廠預設值: 項目...
- Page 10 步驟一: 啟動 MiniOS7 Utility 雙擊 MiniOS7 Utility 桌面捷徑 步驟二: 選取鍵盤 “F12” 或於 “Connection” 選單中選取 “Search” 選取鍵盤 F12 或於 Connection 選單中選取 Search 後, 會出現 MiniOS7 Scan 對話視窗顯示網路上已啟動的 MiniOS7 模組 確認狀態欄上顯示模組搜尋 完畢(Search Done). Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com...
- Page 11 步驟三: 選取模組名稱後移到工具列選取 “IP setting” 於清單上選取模組名稱後移到工具列選取 IP setting 步驟四: 設定新 IP 後選取 “Set” 鈕 步驟五: 選取 “Yes” 鈕後，請重新開 機 WISE-580x 完成設定後, 於 Confirm 對話視窗選 取 Yes 鈕結束程序。隨後請重新開機 WISE-580x。 Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com...
- Page 12 -------------------------------------------------------------- 前往 WISE 規則設定網頁 使用者透過 WISE 控制器所提供的規則設定網頁，只需使用滑鼠點選設定，即可完 成控制器上工作邏輯的規劃。 步驟一: 開啟瀏覽器，填入 WISE 控制器 IP 作為瀏覽器的 URL 位址 開啟電腦上的瀏覽器(推薦使用 IE，新版瀏覽器尤佳)，輸入 WISE 控制器的 IP 作 為 URL 位址(如有重新設定 IP，請確認所輸入 IP 是否正確)。 步驟二: 進入 WISE 規則設定頁面 進入 WISE-580x 控制器所提 供的規則設定頁面後，僅需依 照首頁上的設定流程(基本設 定進階設定規則設定規 則下載)，即可完成 WISE 控制 器的邏輯規則編排。...