ICP DAS USA WISE-2841M Series User Manual page 99

Hide thumbs Also See for WISE-2841M Series:
Table of Contents

Advertisement

ICP DAS WISE User Manual
 IP: Enter the IP address of the IP Camera for the connection.
 Port: Enter the Port number of the IP Camera for the connection.
 Authentication: Because IP Camera requires account and password
validation, please enter the login ID and Password of the IP Camera
in the "Authentication" field. About content of the "Authentication"
field, WISE will pre-input the IP Camera's default login ID and
Password, if user has changed the login ID and Password, please
also remember to change them in the page.
 Time Synchronization: if user click "Enable" to enable the Time
Synchronization function. The WISE will actively connect with IP
Camera to synchronize the clock of IP Camera through network. If
user does not click "Enable", then IP Camera will synchronize its
clock by its original setting.
 File Transfer: The Image files and Video files captured by IP
Camera can be uploaded to remote FTP server of the manage center
via FTP protocol. User can directly select the pre-defined FTP
server from the FTP server list or click on "Add new FTP Server" to
add a new FTP Server to set up parameters for FTP Upload.
 Connection Testing: The user could test if the IP Camera setting is
correct or not. After clicking "Testing" button, the WISE will verify
the connection status with the IP Camera and reply the result.
iCAM-ZMR8422X, iCAM-MR6422X and iCAM-MR6322 support to
set OSD messages displayed on the camera stream. The user can edit
the OSD messages to be displayed on the Camera stream when a
special event occurs, and the content of OSD message can include the
real-time I/O channel data. User can set the color of the OSD message
and the length of the display time, and can set the current message to
be cleared or display another message after the length of the display
time is exceeded. The settings are as below:
 Click on "Add new OSD message" to add a new OSD message
setting. After clicking the "Add new OSD message", a setting page
will appear as below:
http://wise.icpdas.com
99

Advertisement

Table of Contents
loading

Table of Contents