Table of Contents
Advertisement
ICP DAS WISE User Manual
Local FTP Server Setting
User can enable or disable the function of WISE's FTP server. After
enable this functoin, he can connect to WISE FTP Server via FTP
software to remotely retrieve event log or data log files from WISE. To
enable this function, please check "Enable" in the "Server Status" field
and complete the setting of "TLS Encryption", "Username" and
"Password". In the "TLS encryption" field, users can disable TLS
encryption of the server, or enable TLS encrption with "Explicit" or
"Implicit" methods. If TLS encryption function is enabled, users must
use the software with FTPS protocol for the connetcion with WISE's
FTP server. The setting interafce is as shown below.
Local Modbus Server Setting
User can enable or disable the function of WISE's Modbus server. To
enable this function, please check "Enable" in the "Server Status" field
and complete the setting of "Port" and "NetID". The setting interafce is
as shown below.
CGI Query Authentication Setting
WISE supports fully CGI command operations as CGI command
http://wise.icpdas.com
Figure 5-11：Local FTP Server Setting Page
Figure 5-12：Local Modbus Server Setting Page
44
Advertisement
Table of Contents
