I-7000/Dl Dcon Module List Operation Interface; Figure 6-15：Add The I-7000/Dl Module Manually; Figure 6-16：I-7000/Dl Module List Operation Interface - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
iv. Input the Nickname for the I-7000/DL DCON modules.
v. Click
adding the I-7000/DL DCON module, click "Save" button to save
the changes.

6.3 I-7000/DL DCON Module List Operation Interface

After the I-7000/DL DCON modules are added to the I/O Module list via
auto scan or manual work, the I-7000/DL DCON modules will be listed as
below:
The following functions allow to perform settings or rearrange order of the
I-7000/DL DCON modules. Please select the I-7000/DL DCON module and
click on the function button to perform the operations:
 Setting: Click the radio button in front of the I-7000/DL DCON
module and click on "Setting" to get into the setting page of the
I-7000/DL DCON module. The settings for each I-7000/DL DCON
module will be given in the following section.
 Move Up: Click the radio button in front of the I-7000/DL DCON
module and click on "Move Up" to move the I-7000/DL DCON
http://wise.icpdas.com
to add the I-7000/DL DCON module to the list. After
Figure 6-15：Add the I-7000/DL Module manually
Figure 6-16：I-7000/DL Module List Operation Interface
65