Table of Contents
Advertisement
ICP DAS WISE User Manual
"Edit" tab or directly click the "User-Defined Data" text area, and the
"Real-time Variable Editor" will appear as below.
User can input message in the "User-Defined Data" field, and then
select the "Interface", "Module" and "Channel" from the dropdown list
and click "Insert" to add channel value encoded string into the
"User-Defined Data" content. The system will record the data the user
pre-set in the User-Defined Data, and save the real data values in the
SNMP Trap message. When editing the content, the user can select the
"View" tab, and then the channel encoded string will be displayed in
the real index format of the I/O channel for user to check the settings in
an easy way. The figure above shows an example of the encoded
strings, the variable $Xdi0 indicates the DI0 data of XV116, the
variable $C3M1ri0 indicates the AI0 data of M-7019R on the module 1
that is connected to COM3. When users select the "View" tab, the I/O
channel value encoded string will be displayed as below for user to
check if the setting is appropriate, or not.
http://wise.icpdas.com
Figure 9-21："User-Defined Data" Interface in Edit Mode
168
Advertisement
Table of Contents
