Figure 9-3：Timer Status And Actions - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
Timer
Status
Timer
Action
Follow the following steps：
Input the nickname of the timer in the "Nickname" field.
i
ii
Specify the initial status of the timer from the dropdown list of the
"Initial Status" field. The "Initial Status" could be "Stop" or "Start"
status.
iii Specify the period interval in units of seconds. There are two options
to setup the period interval:

Assign Period:
manually.
 Internal Register: Assign the period interval as the value of the
selected Internal Register.
Please note: The user must setup Internal Register before using Internal
Register as timer period. Please refer to
Internal Register.
iv Click
http://wise.icpdas.com
Stop Not Timeout
Timer Period
Start Pause
Figure 9-3：Timer Status and Actions
Input the period interval in units of seconds
button to create a new Timer, and add to the Timer list.
Timeout
Resume
"9.1 Internal
Register" to setup
Reset
156