Figure 6-2：Xv-Board Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
shown as follow:
Please note: Each time WISE is allowed to connect to one XV-Board
module only.
Select the XV-Board that are connected to the WISE from the drop down
list and click "Setting", a window for setting up the parameters of
XV-Board and its I/O channel will appear. The setting for the module is
shown as below (Figure 6-3):
 Nickname: For user to define a nickname for the module, this
nickname will be displayed on the "Channel Status" and "Rule
Setting" pages.
 Description: The Description field provides a space for the user to
make a brief description of this XV-Board.
The digital I/O channels of XV308 are programmable. Each digital I/O
channel of XV308 can be used as DI or DO. If the user selects the XV308
from the drop down list, the setting interface for the attribute of each digital
I/O channel will be shown as below. Please identify them depend on the
application.
The following section will introduce the DI, DO, AI and AO channel
settings of the XV-Board. After all settings are completed, click "Save"
button to save the changes.
http://wise.icpdas.com
Figure 6-2：XV-Board Setting Page
57