Table of Contents
Advertisement
ICP DAS WISE User Manual
iv Click on "OK" to confirm the setting and leave the setting page.
v Repeat steps i~iv to complete settings of all Schedules.
vi To modify the settings of a pre-set Schedule, please click on the radio
button in front of the Schedule, and then click on "Setting" to modify
the settings.
vii To copy the settings of a pre-set Schedule to the new Schedule, please
click the radio button in front of the pre-set Schedule and then click
"Copy", a new Schedule (in sequence) will be added to the list and the
settings of the old Schedule will be copied to this newly added
Schedule.
viii To remove a pre-set Schedule, please click the radio button in front of
the pre-set Schedule and then click "Remove".
ix After all schedule settings are completed, click "Save" button to save
the changes.
9.4 Email Setting
WISE support Email messages sending function. This function allows
sending pre-input Email message(s) to pre-set Email receiver(s) under
certain conditions. The configuration page is shown as below:
The settings steps are as below:
Click on "Add new email" to add a new email setting.
i
After clicking the "Add new email", a setting page will appear, input a
ii
name in the "Nickname" field and you could also input the description
of this email in the "Description" field; shown as below:
http://wise.icpdas.com
Figure 9-10：Email List Page
161
Advertisement
Table of Contents
