Table of Contents
Advertisement
ICP DAS WISE User Manual
10.2.7.3
You can reset the saved content of the subscribe topic when executing
a THEN/ELSE Action statement; the editing page is shown as below:
Follow the steps below:
i Select a pre-set MQTT Subscribe Topic from the dropdown list
ii Click "OK" button to confirm the settings and return to the Rule
10.2.8 Timer
You can change the Timer status in the THEN/ELSE Action statement; the
editing page for Timer Action Setting is shown as below:
Follow the following steps:
i Select the pre-defined Timer from the dropdown list of the "Timer"
field.
ii Specify you want to "Reset", "Start", "Pause" or "Resume" this
Timer when this THEN/ELSE Action statement is executed. The
"Start" Action will start to run the Timer and if the "Start" Action is
http://wise.icpdas.com
settings page.
Reset Topic
Figure 10-54：MQTT Reset Topic action setting page
of the "Broker" and "Topic" fields. When this action is
executed, WISE would reset the message of the topic, and the
evaluation result of the IF statement which is associated with
the topic will be verified again.
settings page.
Figure 10-55：Timer action setting page
239
Advertisement
Table of Contents
