Figure 6-19：I-7000/Dl Module Ai Channel Setting Page - ICP DAS USA WISE-2841M Series User Manual

ICP DAS WISE User Manual
I-7000/DL DCON Module List.
Please Note:
1. To set up the Power On value of the DO channels on I-7000/DL
DCON modules, please use DCON Utility to set the value.
2. The DO channels on I-7000/DL DCON modules do not offer Pulse
Output function.
6.3.3 The AI channel setting for I-7000/DL DCON module
The I-7000/DL DCON module AI channel setting interface is shown as
below (using I-7012 as an example):
The settings are as below:
 Nickname: For user to define nickname for the module and the I/O
channels, these nicknames will be displayed on the "Channel
Status" and "Rule Setting" pages.
 Temperature Unit: Specify the temperature measurement unit for
the modules that allows for temperature measurement, such as
I-7005, I-7011, I-7013, I-7015, I-7018 and I-7019, the temperature
units can be set as degree Celsius or degree Fahrenheit.
 Type: Select the input signal type of the AI channel from the
dropdown list.
 Scale: In the "Scale" field, AI channel raw data can be set to
operate with linear proportion between "Minimum" and
"Maximum"
http://wise.icpdas.com
Figure 6-19：I-7000/DL Module AI Channel Setting page
values. The IF Condition will use this
69