ICP DAS USA WISE-2841M Series User Manual page 101

ICP DAS WISE User Manual
The number of characters that can be displayed is depended on the
resolution setting of the IP Camera. If the OSD message cannot be
displayed completely, please reduce the character number of the
message.
After all settings of the IP Camera are completed, click "OK" button to
save the changes and return to IP Camera List.
6.9.2 The Setting of iCAM IP Camera(iCAM)
ICP DAS iCAM IP Camera provides Motion Detection, Tampering
Detection, Snapshot and Video recording functions. If the user wants to
add the iCAM IP Camera's event into the WISE's IF-THEN-ESLE rule
as the IF Condition or THEN/ELSE action, or requires the iCAM IP
Camera to report the status of Motion detection to WISE, please
remember to complete the Event setting of iCAM IP Camera in
advance. About the Event setting of iCAM IP Camera, please refer to
the iCAM IP Camera User Manual for detail.
In additional, after completing the settings of 6.9.1 section, WISE will
automatically re-write the FTP related setting into the iCAM IP Camera,
the user does not need to assign the settings of "IP Camera's FTP file
sending operation by Event trigger" again.
Please Note：
 If the user wants to enable the IP Camera's image/video capture
operation, please remember to complete the settings as below.
1. Snapshot for periodic Recording: Please complete the iCAM IP
http://wise.icpdas.com
101