Setting The Paper Size - Minolta Di551 Service Manual

[4] Setting the Paper Size

When the LCT paper type is changed, it must be stored
in the main body. This setting is effective when an
optional LCT is added.
Select a paper size among standard, non-standard
paper sizes. After selecting a tray size, specify a paper
size.
1. Setting the standard size
Step
1 Enter the 25 mode.
2 [Memory setting mode menu Screen]
Select " 2 Paper size setting".
3 [Paper size setting mode Screen]
Press the
STD SIZE
4
Press the
paper size.
5
Press the
OK
cancel the new setting, press the
key, Pressing either key will
CANCEL
display the Memory setting mode menu
Screen again.
Operation
key.
or button to select a
key to finish setting.To
2. Setting the non-standard size
Step
1 Enter the 25 mode.
2 [Memory setting mode menu Screen]
Select "
2
3 [Paper size setting mode Screen]
Press the
4 [Paper size input Screen]
Press the key for specifying the main (ver-
tical) scanning direction to highlight it.
5
Press the
to enter the size in the main (vertical)scan-
ning direction. Max. 314 mm
6 Press the key for specifying the sub (hori-
zontal) scanning direction to highlight it.
7
Press the
to enter the size in the sub (horizontal)
scanning direction. Max. 223 mm(LT-402),
459mm(LT-412)
8
Press the
To cancel the new setting, press the
CANCEL
Pressing either key will display the Memory
setting mode menu Screen again.
2-23
ADJUSTMENT
Operation
Tray Size Setting."
key.
Non STD size
or key or numeric keys
or key or numeric keys
key to finish setting.
OK
key.