Minolta Di551 Service Manual page 316

*13 Transfer/separation output for recycled paper
These bits are used when "Recycle" is selected
for "Paper type/special size setting" in the key
operator mode.
When "User paper" is selected with these bits,
the transfer/separation output for the user paper
setting made in the 36 mode is applied. When
"No specification" is selected, output data by
destination and paper size (metric or inch series)
(Japan/metric: 64 g/m
area/inch: 20 lb standard paper, AB: 80 g/m
standard paper Metric area/metric: 80 g/m
standard paper, inch: 20 lb standard paper) is
used.
When humid paper causes uneven image, select
"humid paper 1/2/3".
Mode
No specification
2
64 g/m standard paper
(Japan)
20 lb standard paper (USA)
2
80g/m standard paper
(Europe)
Humid paper 1 (Japan)
Humid paper 2 (USA)
Humid paper 3 (Europe)
User paper
*14 Fixing roller initial rotation
Fixing may be insufficient if the temperature of
the place where the machine is installed is low.
To prevent this, increase the warm-up time (fixing
roller initial rotation time) to allow the fixing roller
to be evenly warmed up. This bit specifies the
condition(s) under which initial rotation of the fix-
ing roller is required.
• Low temperature: Initial rotation of the fixing
roller is carried out only under the low temper-
ature condition.
• Low and normal temperatures: Initial rotation
of the fixing roller is carried out under low and
normal temperature conditions.
• Low, normal, and high temperatures: Initial
rotation of the fixing roller is carried out under
low, normal, and high temperature conditions.
2
standard paper, Inch
2
2
7-7 7-6 7-5
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
2-19
Mode
Low temperature
Low and normal temperature
Low, normal, and high tem-
peratures
No initial rotation
*15 Fixing roller initial rotation time setting
This bit sets the maximum time of initial rotation
of the fixing roller.
Mode
2 minutes (Japan)
3 minutes (Inch and Metric series)
4 minutes
10 minutes
*16 Message switching
Mode
Please insert key counter.
Please insert copy card.
Please insert coin.
Please insert key counter.
ADJUSTMENT
8-3 8-2
0 0
0 1
1 0
1 1
8-5 8-4
0 0
0 1
1 0
1 1
9-3 9-2
0 0
0 1
1 0
1 1