Minolta Di551 Service Manual page 108

1
12
11
10
9
8
13
1. Reverse/exit selection gate
2. Exit roller
3. Fixing exit PS (PS30)
4. Fixing roller (upper)
5. Fixing roller (lower)
6. ADU reverse roller
7. ADU gate
8. Reverse/exit roller
9. Paper reverse PS (PS42)
10. Reverse/exit gate
11. Decurler roller
12. Main body exit roller
13. Reverse/exit gate
b. Straight ejection
When paper is ejected straight, the reverse gate
SD (SD7) is turned ON to close the reverse/exit
selection gate. The paper fed by the paper exit
roller is fed to the paper exit roller with the print
side up.
3
2
4
5
7
6
2-N-5
6
5
1. Fixing roller (upper)
2. Fixing roller (lower)
3. Fixing exit PS (PS30)
4. Exit roller
5. Reverse/exit selection gatet
6. Main body exit roller
c. ADU paper conveyance
In the two-sided copy mode, the paper finished
with printing on the front side is fed, through the
path under the reverse/exit selection gate, into
the reverse/exit section just like the reverse/exit
operation. Then, the paper is fed to the ADU by
the reverse/exit roller and ADU reverse roller.
These rollers do not rotate in the opposite direc-
tion even when the paper reverse PS (PS42)
detects the trailing edge of the paper, allowing
the paper to be fed until the reverse/exit PS
(PS46) turns OFF.
1
9
8
7
6
5
1. Reverse/exit selection gate
2. Fixing roller (upper)
3. Fixing roller (lower)
4. ADU reverse roller
5. Reverse/exit PS (PS46)
6. ADU gate
7. Reverse/exit roller
8. Paper reverse PS (PS42)
9. Reverse/exit gate
ADU
1
2
4
3
2
3
4