Setting Passwords - Minolta Di551 Service Manual

ADJUSTMENT
Reference1: The characters entered in the data
field of each data item will be
shifted to the left one after another.
Reference2: When the number of entered char-
acters exceeds 10, the leftmost
character will disappear.

[10] Setting Passwords

This function allows you to set the following passwords:
1. Key operator password (4 digits)
This password is required to enter the key oper-
ator mode.
2. EKC master key code (8 digits)
This code is necessary when entering various
EKC setting modes.
3. Weekly timer password (4 digits)
This password is necessary when entering vari-
ous weekly timer setting modes.
Note: This password cannot be set if "Weekly
timer ON" is not specified for the weekly
timer in the key operator mode.
4. HDD management password (4 digits)
This password is necessary when entering the
HDD management modes in the key operator
mode while connecting the optional hard disk.
Step
Enter the 25 mode.
1
[Memory setting mode menu Screen]
2
Select the "
[Password setting mode Screen]
Select "key operator password (4 digits)",
"EKC master key code (8 digits)", "Weekly
3
timer password (4 digits)" or "HDD man-
agement password (4 digits)".
Enter a new password using numeric keys.
4
Perform step 3 and 4 repeatedly to set
5
other passwords.
Press the
words to take effect.
To cancel the new passwords, press the
6
CANCEL
display the Memory setting mode menu
Screen again.
2-46
Operation
Password setting".
6
key to allow the pass-
OK
key. Pressing either key will