Removing And Reinstalling The Charging Wire Cleaning Unit - Minolta Di551 Service Manual

(4) Remove the charge control plate cleaner.
(5) Remove the spring and remove the charging
wire.
1
1
1. Charging wire
2. Charge control plate cleaner
3. Spring
(6) Reinstall the above parts following the removal
steps in reverse.
[5] Removing and Reinstalling the
2
a.
(1) Remove the charging wire.
(2) Remove the stop ring and remove the charging
3
(3) Reinstall the above parts following the removal
1-F-3
Charging Wire Cleaning Unit
Caution:
Be sure the power cord has been
unplugged from the wall outlet.
Procedure
wire cleaning pad.
Caution1: When removing the charging wire
cleaning pad, be careful not to drop
the two collars.
Collar
Charging wire cleaning pad
Caution2: When installing the charging wire
cleaning pad, install the pad in the
orientation shown below. Also, do
not forget to attach the two collars.
Charging wire cleaning pad
steps in reverse.
CORONA UNIT
Stop ring
Collar