Table of Contents
Advertisement
(3) Loosen one screw and remove the developing
suction filter cover.
(4) Loosen five screws and detach the right side
cover (upper).
Caution: The developing suction filter cover
detaches together with the right side
cover (upper).
(5) Loosen two screws to detach the right side cover
(lower front).
(6) Loosen two screws to detach the right side cover
(lower rear).
(7) Loosen two screws to detach the right side cover
(lower middle).
1
6
6
4
5
1.
Right side cover (upper)
2.
Developing suction filter cover
3.
Right side cover (lower rear)
4.
Right side cover (lower middle)
5.
Right side cover (lower front)
6.
Screws
(8) Open the RADF.
(9) Remove the two shoulder screws to remove the
original stopper plate (left).
(10) Remove the three shoulder screws to remove the
original stopper plate (rear).
(11) Remove the platen glass.
(12) Remove two screws to detach the top cover (left).
(13) Remove two screws to detach the top cover
(right).
2
6
6
3
6
1-A-3
(14) Remove the top cover (middle front) and top
cover (middle rear).
8
2
1
9
8
1.
Top cover (left)
2.
Top cover (middle rear)
3.
Original stopper plate (rear)
4.
Top cover (right)
5.
Top cover (middle front)
6.
Platen glass
7.
Original stopper plate (left)
8.
Shoulder screws
9.
Screws
EXTERNAL SECTION
3
4
9
5
6
7
Advertisement
Chapters
Table of Contents
