Paper Up/Down Plate Horizontal Adjustment (Lct Only) - Minolta Di551 Service Manual

[4] Paper up/down plate horizontal
adjustment (LCT only)
Caution: Up/down plate horizontal adjustment
must be carried out when a paper feed
jam occurs frequently or after replace-
ment of the up/down wires of a tray.
1. Tool
• Screwdriver (Phillips)
2. LCT up/down plate horizontal adjustment of C-
403
1
1
1. Up/down plate
2. Up/down pulley
3. Adjusting screws
4. Screws
a. Adjustment method
Step
1
2
4
3
2
3
2
4
4
2-105
Operation
Raise the up/down plate.
Open the top cover.
Remove five screws to detach the side
cover (right).
Side cover (right)
Open the jam access door, then remove six
screws to detach the front cover.
Jam access door
Screws
Side cover (right)
ADJUSTMENT
Screws
Screws
Screws