Changing The Operation Panel Attachment Angle And Removing/Reinstalling - Minolta Di551 Service Manual

EXTERNAL SECTION
(15) Open the front right door and front left door.
(16) Remove two screws to remove the front right
door hinge (lower) and front right door.
(17) Remove two screws and remove the front left
door hinge (lower) and the front left door.
5
2
4
1. Front right door
2. Front right door hinge (lower)
3. Front left door hinge (lower)
4. Front left door
5. Screws
(18) Reinstall the above parts following the removal
steps in reverse.
[4] Changing the Operation Panel
Attachment Angle and Removing/
Reinstalling
a. Procedure
(1) Open the front left door and front right door.
(2) Remove two screws to remove the operation
panel cover (middle).
1
3
(3) Remove two screws to unlock the operation
panel.
5
1-A-4
Caution:
Be sure the power cord has been
unplugged from the wall outlet.
Operation panel cover (middle)
Screws
Operation panel
Screws
Attachment holes when changing
the operation panel angle
Screws