Minolta Di551 Service Manual page 338

NO Part name
11 Trans./sep. cleaning assembly
12 Fixing upper roller
13 Fixing lower roller
14 Fixing upper claw
15 Fixing lower claw
16 Heat insulate sleeve (upper)
17 Upper roller bearing
18 Cleaning roller
19 Toner control board unit
20 Trans./sep. corona unit
21 Separation cleaning assembly
22 Charging wire
23 Upper roller error detection sensor
24 Ozone filter
25 Charging corona unit
26 PCL assembly
27 Developer
28 TSL cover assembly
29 Tray 1 feed rubber
30 Tray 1 feed conv/rev rubber
31 Tray 1 feed clutch
32 Tray 1 convey clutch
33 Tray 1 feed count
34 Tray 2 feed rubber
35 Tray 2 feed conv/rev rubber
36 Tray 2 feed clutch
37 Tray 2 convey clutch
38 Tray 2 feed count
39 Tray 3 feed rubber
40 Tray 3 feed conv/rev rubber
41 Tray 3 feed clutch
42 Tray 3 convey clutch
43 Tray 3 feed count
Maximum
Counting condition
count
99999999 25DIPSW8-6
=0: Count 1 per ejected paper for single sided, 2
for double sided
=1: For A3, 11x17, 8k, count 2 per ejected paper
for single sided, 4 for double sided
1 is counted each time the paper from tray 1 is
ejected.
1 is counted each time the paper from tray 2 is
ejected.
1 is counted each time the paper from tray 3 is
ejected.
2-41
ADJUSTMENT