Minolta Di551 Service Manual page 206

<Installing Wires>
2
. Install the pulley, pass wire
D through the pulley, and
install the wire restraining
cover and E-ring.
1
2
3
. Pass wire C through
the up/down plate.
6
5
1.
Pass wire D through
the up/down plate.
10
6.
Repeat steps 1 to 4 to install wire A
and wire B.
1. Wire restraining cover
2. Pulley
3. E-ring
4. Drive pulley
5. Wire D (White)
4
. Install the pulley, pass wires
C and D, and install the wire
restraining cover and retain-
ing ring. Wire D must be
inside. Wires must not cross.
3
6
5
8
7
6.
7.
8.
9.
10. Up/down plate
1-J-5
PAPER FEED UNITS OF TRAYS 1 AND 2
5.
Install the wires C and D from
inside the drive shaft hole,
push in the drive pulley, and
secure with E-ring.
5
4
3
7.
Install the wires A and B from
inside the drive shaft hole, push
in the drive pulley, and secure
with E-ring. Next, install the
drive pulley holder.
7
4
Wire C (black)
Wire B (white)
Wire A (black)
Drive pulley holder
6
8
9
3