Minolta Di551 Service Manual page 339

ADJUSTMENT
NO Part name
44 Tray 4 feed rubber (Japan only)
45 Tray 4 feed conv/rev rubber
(Japan only)
46 Tray 4 feed clutch
(Japan only)
47 Tray 4 convey clutch
(Japan only)
48 Tray 4 feed count
(Japan only)
49 By-pass feed roller
50 By-pass conveyance/reverse roller
51 By-pass count
52 LCT feed roller
53 LCT conveyance/reverse roller
54 LCT feed clutch
55 LCT conveyance clutch
56 LCT feed count
57 Loop roller
58 V-convey exit feed roller
59 V-convey feed roller/M
60 V-convey feed roller/ L
61 V-convey feed clutch 1
62 V-convey feed clutch 2
63 Web solenoid
64 Registration clutch
65 ADU preregistration clutch
66 Resistration feed count
67 Reverse exit count
68 ADU feed count
69 FNS up/down motor
Maximum
Counting condition
count
99999999 1 is counted each time the paper from tray 4 is
ejected.
1 is counted each time the paper from by-pass
tray is ejected.
1 is counted each time the paper from LCT is
ejected.
1 is counted each time the paper from tray 1, tray
2, tray 3, tray 4 and LCT is ejected.
1 is counted each time the paper from tray 2, tray
3 and tray 4 is ejected.
1 is counted each time the paper from tray 3 and
tray 4 is ejected.
1 is counted each time the paper from tray 4 is
ejected.
1 is counted each time the paper from tray 2, tray
3, and tray 4 is ejected.
1 is counted each time the paper from tray 3 and
tray 4 is ejected.
Every operation
1 is counted each time single side original is
ejected; 2 is counted each time double side
paper is ejected.
1 is counted each time double side paper is
ejected (not counted for single side paper)
1 is counted each time single side original is
ejected; 2 is counted each time double side orig-
inal is ejected.
2 is counted each time single side paper is
ejected after being reversed. 0 is counted each
time single side paper is ejected straight. 1 is
counted each time bouble side paper is ejected.
1 is counted each time double side paper is
ejected (not counted for single side paper)
1 is counted each time the paper from FNS main
tray is ejected. 1 is counted each time a copy is
ejected in stapling mode.
2-42