FN-6 / FN-112
[3] Removing and Reinstalling the Top
Cover/2
Caution:
Make sure that the power cord of the main
body is unplugged from the power outlet.
CAUTION: Uninstall the PI (optional) if installed.
a.
Procedure
(1) Remove the top cover/1.
(2) Open the front door.
(3) Remove four screws, and pull out the sub-tray.
Then remove the top cover/2.
2
1
1.
Front door
2.
Top cover/2
3.
Sub-tray
4.
Screws
(4) Reinstall the above parts following the removal
steps in reverse.
[4] Removing and Reinstalling the Side
a.
(1) Open the front door.
(2) Remove three screws, and remove the side
4
3
(3) Reinstall the above parts following the removal
4
1-R-2
Cover
Caution:
Make sure that the power cord of the main
body is unplugged from the power outlet.
Procedure
cover.
Side cover
Screws
steps in reverse.