Minolta Di551 Service Manual page 554

Step Procedure
4 In the ISW Trns main window, click
[Divide] field in [Select Type] and select a
method of dividing the transfer files (update
data) from the pulldown menu.
Note1: Normally, select ORIGINAL as the
method of division.
Note2: Select DIVIDED for large ROM data
(e.g. for Main Control Unit), that is
divided into several files (extension
.001.b01, etc.) to be stored to sev-
eral floppy disks for distribution.
6. Selecting a version of transfer files
(update data)
When a transfer file (update data) has been cho-
in the
sen to meet a given set of conditions, it may be
available in multiple versions. Here, select a par-
ticular version of a transfer file (update data) for
use in the actual data transfer.
Step
1 [ISW Trns main window]
In the ISW Trns main window, select a trans-
fer file (update data) of the version that is
used in the actual data transfer from among
the files listed in the [File] field in [Version].
Note: The version of a transfer file (update
2 The target file (update data) may not be
shown in the [File] field in [Version], if it exists
in a folder different from the data folders set in
the Option screen. Click Browse and find the
appropriate file to select.
Note: Clicking Browse will open the Select
5-15
Procedure
data) can be determined from its file
name.
Example:
26nac001AAAA.b01 .. Version 1
26nac002AAAA.b01 .. Version 2
File window.
ISW