Replacing The Lt Feed Mc (Mc101)/Lt First Paper Feed Mc (Mc102) - Minolta Di551 Service Manual

[6] Replacing the LT feed MC (MC101)/LT
first paper feed MC (MC102)
a. Procedure
(1) Open the top cover.
(2) Remove the spring from the paper feed roller
unit.
(3) Remove two screws to detach the top cover.
Screws
(4) Remove three screws to detach the clutch
replacement cover.
Clutch replacement cover
Screws
Top cover
1-Q-5
(5) Disconnect two relay connectors (CN765,
CN766) of the clutches.
(6) Remove the stop ring to detach each clutch.
2
1
5
1. Stop ring
2. LT feed MC (MC101)
3. LT first paper feed MC (MC102)
4. Relay connector (CN765)
5. Relay connector (CN766)
(7) Reinstall the above parts following the removal
steps in reverse.
Caution: When installing each MC, make sure
that the stopper of each clutch is on
the predefined position.
C-403 / C-404
3
1
4