Cleaning The Punch Edges And Punch Scraps Full Ps (Ps802) - Minolta Di551 Service Manual

PK-2
(3) Disconnect two connectors (CN65, CN66) con-
necting the punch unit from the PK drive board.
1
4
5
1. Connector (CN66)
2. Connector (CN65)
3. Punch drive board (PKDB)
4. Punch unit
5. Screw
(4) Remove the punch unit from FNS by removing
two screws.
(5) Reinstall the above parts following the removal
steps in reverse.
2
3
1-T-2
[2] Cleaning the Punch Edges and Punch
Scraps Full PS (PS802)
Caution:Be sure to unplug the power
cords of the main body and this
machine from the wall outlet.
a. Procedure
(1) Remove the punch unit.
(2) Use a blower brush to remove paper dust and
punch scraps from the punch edges and punch
scraps full PS (PS802).
Punch edges
Punch scraps full PS (PS802)
(3) Reinstall the above parts following the removal
steps in reverse.