OTHER
[1] Installation of the Key Counter Socket
(OPTION)
1. Remove the Rear Cover and Right Side
Cover.
2. Remove the Key Counter Cover from the
Right Side Cover.
Key Counter Cover
3. Remove two screws and the Cover.
4. Use two screws, secure the Key Counter
Socket.
5. Remove dummy connector.
Connect the Key Counter Socket connector.
Note: When the Key Counter Socket is mounted, Set
to the Software DIP Switches.
*25mode: DipSW No.4 Bit.4. (
Key counter removal recovery.
*25mode: DipSW No.9 Bit.4 - 0 (
Operation at the counter removal.
1-U-1
Other
2-9)
2-10)