Error Code List - Minolta Di551 Service Manual

ELECTRIC PARTS LIST

ERROR CODE LIST

Warning
Classification
Code
Drive F13-01
F13-02
Tray 1 F18-10
F18-11
Tray 2 F18-20
F18-21
Tray 3 F18-30
F18-31
LCT F18-50
F18-51
Cause
Error detection signal is detected
continuously for one second when
two seconds have passed since M1
(paper feed) has turned ON.
Error detection signal is detected
continuously for one second when
two seconds have passed since
M101 (LT paper feed) has turned ON.
Error detection signal for M16 (tray
up drive /1) is detected while M16 is
turned ON.
PS2 (tray upper limit/1) does not turn
ON within 20 seconds since the lifting
motion triggered by activating M16
(tray up drive /1) has started while
PS2 is turned OFF.
Error detection signal for M17 (tray
up drive /2) is detected while M17 is
turned ON.
PS8 (tray upper limit/2) does not turn
ON within 20 seconds since the lifting
motion triggered by activating M17
(tray up drive /2) has started while
PS8 is turned OFF.
Error detection signal for M18 (tray
up drive /3) is detected while M18 is
turned ON.
PS14 (tray upper limit/3) does not
turn ON within 20 seconds since the
lifting motion triggered by activating
M18 (tray up drive /3) has started
while PS14 is turned OFF.
Error detection signal for M100 (LT
up/down) is detected continuously
for one second while M100 is turned
ON.
PS109 (LT upper limit detection) or
PS101 (LT lower limit detection) does
not turn ON within 35 seconds since
the lifting or descent motion triggered
by activating M100 (LT up/down) has
started while PS109 or PS101 is
turned OFF.
Machine response
The machine stops
immediately and turns
OFF RL1 (main).
The machine stops
immediately and turns
OFF RL1 (Main).
4-38
Estimated
abnormal parts
M1 (paper feed)
PRCB (printer control board)
M101 (LT paper feed)
LTDB (LT drive board)
M16 (tray up drive /1)
PRCB (printer control board)
PS2 (tray upper limit/1)
M17 (tray up drive /2)
PRCB (printer control board)
PS8 (tray upper limit/2)
M18 (tray up drive /3)
PRCB (printer control board)
PS14 (tray upper limit/3)
M100 (LT up/down)
LTDB (LT drive board)
PS101 (LT lower limit detec-
tion)
PS109 (LT upper limit detec-
tion)