Minolta Di551 Service Manual page 378

3. Cover sheet tray size adjustment
(Cover Inserter B only)
This adjustment should be performed when the
cover sheet tray size cannot be detected properly
and when centring adjustment for cover sheet
tray is performed.
Step Operation
Enter the 36 mode.
1
[Adjustment mode menu Screen]
2
Press " Finisher adjustment".
6
[Finisher adjustment mode menu
Screen]
3
Press " Cover sheet tray size adjust-
3
ment".
[Cover sheet tray size adj. Screen]
4 Press or
NEXT
tray to be adjusted.
Set a A4R size paper on the cover sheet
tray (upper/lower), press the
the LCD. A complete message appears on
the screen.
cover sheet tray
5
Press the
RETURN
6
Finisher adjustment mode menu Screen.
key to select the
BACK
key on
Start
key to return to the
2-81
4. Punch adjustment (PK-2, PK-5, ZK-2)
This performs the punch horizontal positions and
adjusts punch registration loop amount.
1. Select " Punch adjustment" on the Finisher
5
adjustment mode menu Screen to display the
Punch adjustment menu Screen.
2. Punch adjustment includes the following items:
Punch kit vertical position adjustment
1
(PK-5)
Punch kit horizontal position adjustment
2
(PK-2, PK-5)
Punch unit vertical position adjustment
3
(ZK-2)
Punch unit horizontal position adjustment
4
(ZK-2)
Punch regist loop adjustment
5
(PK-2, PK-5, ZK-2)
3. Press the number key corresponding to the item
to be adjusted. The adjustment screen for the
selected adjustment item appears.
4. After adjustment completes, return to the Punch
adjustment menu Screen.
5. Press the
RETURN
ment menu to return to the Finisher adjustment
mode menu Screen.
ADJUSTMENT
key of the Punch adjust-