Minolta Di551 Service Manual page 268

<Installing the Up/Down Wires>
Wire C
Wire D
7.Insert wire D in the
pulleys, then attach a
metal ball.
15.Insert wire A in the
pulleys, then attach a
metal ball.
12.Insert wire B in the
pulleys, then attach a
metal ball.
10.Insert wire C in the
pulleys, then attach a
metal ball.
Wire A
Wire B
13.Insert wire A in the up/down
shaft, attach a pulley, and
secure the pulley with an E-
ring.
14.Wind wire A around the pulley
by 6 turns in such a manner
that the wire can be pulled from
over the pulley.
6 turns
11.Insert wire B in the up/down shaft,
attach a pulley, and wind wire B
around the pulley by six turns in
such a manner that the wire can be
pulled from over the pulley.
Up/down plate
Wire C
Wire D
FRONT
1.
6.
3. Insert wire C in the up/down
8.
shaft, attach a pulley, and
secure the pulley with E-rings.
4.
9.
6 turns
1-Q-13
C-403 / C-404
20.Insert wire A in the pulleys,
then attach a metal ball.
2.Insert wire D in the pulleys,
then attach a metal ball.
17.Insert wire B in the pulleys,
then attach a metal ball.
5.Insert wire C in the pulleys,
then attach a metal ball.
Wire B
Wire A
Up/down shaft
18.Insert wire A in the up/
down shaft, attach a pul-
ley, and secure the pulley
with an E-ring.
19.Wind wire A around the
pulley by 6 turns in such a
manner that the wire can
be pulled from over the
pulley.
6 turns
16.Insert wire B in the up/
down shaft, attach a pul-
ley, and wind wire B
around the pulley by six
turns in such a manner
that the wire can be pulled
from over the pulley.
6 turns