Minolta Di551 Service Manual page 503

ELECTRIC PARTS LIST
Jam
Classification
Code
FN-6 / J72-28
FN-112
J72-29
J72-30
Cover Inserter J72-35
B
ZK-2 J72-38
J72-39
J72-40
J72-41
J72-42
PK-2 / PK-5 / J72-43
ZK-2
Cause
PS705 (stacker entrance) does not turn
OFF within the predefined time since it has
turned ON.
PS706 (main tray paper exit) does not turn
OFF within the predefined time since it has
turned ON. (non-stapling mode)
PS706 (main tray paper exit) does not turn
OFF within the predefined time since it has
turned ON. (Staple mode small-size
paper)
PS206 (PI passage /L) does not turn ON
within the predefined time after MC202
(conveyance MC/L) has turned ON.
Leading/trailing/side edge PS on paper
edge PS does not turn ON within the pre-
defined time since PS37 (main body paper
exit) has turned ON.
Leading/trailing/side edge PS on paper
edge PS does not turn OFF within the pre-
defined time since it has turned ON.
PS1 (passage) does not turn ON within the
predefined time since leading/trailing/side
edge PS on paper edge PS has turned ON.
PS1 (passage) does not turn OFF within
the predefined time since it has turned ON.
In Z-fold mode, during the 2nd folding oper-
ation, PS1 (passage) does not turn OFF
within the predefined time after it has been
turned ON.
During the 2nd Z-fold exit operation, PS1
(passage) does not turn OFF within the
predefined time since it has turned ON.
PS801 (punch HP) does not turn ON within
the predefined time after M801 (punch)
has turned ON. Or, leading/trailing/side
edge PS on paper edge PS does not turn
OFF within the predefined time since
M802 (Punch shift) has turned ON.
4-34
Machine response Countermeasure
Machine stops Remove the jammed
immediately. paper from the FNS or
the main body.
Remove any jammed
paper in the PZ / main
body.
Remove the jammed
paper from the FNS or
the main body.