Setting Up Isw Trns - Minolta Di551 Service Manual

[2] Setting Up ISW Trns

1. Installing the application program
Install the ISW Trns on the PC.
Step Procedure
Boot the PC.
1
2 Mount setup disk 1 on the PC and double-
click the [Setup.exe] icon to start the installer.
Note: If an old version ISW Trns program is
present, uninstall it first, then start
the setup operation.
3 [ISW Trns setup window]
Confirm the installation folder as instructed
by on-screen guidance and click Next.
Note1: By default, the program installs in
[C:\Program_File\Minolta\ISWTrns
for Minolta].
Note2: To change the installation folder,
click Browse and type a new folder
name.
4 [Program folder confirmation window]
Confirm the ISW Trns program installation
folder as instructed by on-screen guidance
and click Next.
Note1: By default, the ISW Trns program
installs in [ISWTrns for Minolta].
Note2: To change the installation folder,
either type a new folder name or
select one from the list of existing
folders on display.
5 [Next disk insertion request window]
Mount setup disk 2 as instructed by on-
screen guidance and click OK.
6 [Information dialog box]
Click OK as instructed by on-screen guid-
ance.
Note: This procedure will add an ISW Trns
icon to the Start menu.
7 [Setup completion window]
Click Complete as instructed by on-screen
guidance.
8 The ISW Trns install exits automatically.
2. Setting up ISW Trns
When the ISW Trns program has been installed
on the PC, run it to set up a folder in which the
transfer file (update data) is stored. When this
setting completes, the ISW Trns program is
ready to run.
Step
1 Boot the PC.
2 [Select [ISW Trns] from the start menu to run
the ISW Trns program.
3 [ISW Trns dialog box]
Click OK to set up a folder in which the trans-
fer file (update data) is stored.
Note: This dialog box will not appear when
ISW Trns is run next time.
4 [Option window]
Set up a folder in which the transfer file
(update data) is stored and click Make Folder.
Note1: By default, the folder in which the
ISW Trns program has installed
(C:\Program_File\Minolta\ISWTrns
for Minolta) has been set up as a
storage folder (data folder).
Note2: To change the storage folder, click
Browse and select a new folder or
type its full-path name in directly the
edit box.
5-7
ISW
Procedure