Minolta Di551 Service Manual page 514

Warning
Classification
Code
Image con- E46-14 During image read, image data
trol abnor- decompression from the memory to
mality the printer is not completed within the
specified time. Image data output
from the page memory to the printer
is not completed within the specified
time. PVV is not detected within the
specified time.
E46-15 During image write, improper pro-
cessing was performed. For exam-
ple, the decompression device was
accessed although there was no
resource.
E46-16 During image read, improper pro-
cessing was performed. For exam-
ple, the compression device was
accessed although there was no
resource.
E46-17 During image processing, a filter
coefficient could not be generated
properly.
E46-19 During access to the memory device,
a software error was detected.
E46-21 Decompression from the memory to
the page memory is not completed
within the specified time.
Compression from the page memory
to the memory is not completed
within the specified time.
Decompression from the memory to
the page memory is not completed
within the specified time.
Compressed data transfer between
memories is not completed within the
specified time.
E46-23 During image read, SVV is not turned
OFF within the specified time and
therefore preparation for next page
scanning cannot be started.
E46-24 Shading correction error (GA error)
Cause Machine response
If copy operation is
being performed, the
machine stops after
paper ejection.
RL1 (main) is turned
OFF.
4-45
ELECTRIC PARTS LIST
Estimated
abnormal parts
PRCB (printer control board)
ICB (image control board)
ICB (image control board)
ICB program
PRCB (printer control board)
ICB (image control board)
ICB program
ICB (image control board)
ICB (image control board)
ICB program