Table of Contents
Advertisement
ADU UNIT
(13) Remove the stop rings to remove the ADU decel-
eration MC (MC2) and ADU conveyance MC
(MC13).
1
3
1.
ADU conveyance MC (MC13)
2.
ADU deceleration MC (MC2)
3.
Stop rings
(14) Remove the E-ring at the rear, two belt holding
collars, ADU conveyance belt (1), and two ADU
conveyance pulleys.
(15) Remove the pin from each roller shaft.
(16) Remove the E-ring and bearing on the inside of
the ADU conveyance pulley.
(17) Remove the E-ring on the ADU conveyance
roller(3) shaft.
(18) Remove the front E-ring and bearing, and
remove the ADU conveyance roller (3) and ADU
conveyance roller (4) by sliding them back and
forth.
3
4
2
3
3
(19) Reinstall the above parts following the removal
steps in reverse.
1-N-14
1
2
1
6
7
8
2
3
1.
Bearing
2.
ADU conveyance belt (1)
3.
E-ring
4.
Pin
5.
Belt holding collars
6.
ADU conveyance pulley
7.
ADU conveyance roller (3)
8.
ADU conveyance roller (4)
3
4
5
3
Advertisement
Chapters
Table of Contents
