Minolta Di551 Service Manual page 424

Hide thumbs Also See for Di551:

Table of Contents

Loosen the four screws for each clincher.

Insert the two guide pins of the jig in the

hole of the clincher.

Caution: The positioning portion of the jig

need not be engaged with the

clincher completely.

Rotate the stapler gears downward. Adjust

the clincher position so that the plate on the

cartridge fits smoothly into the groove on

the jig. Rotate the stapler gear further to fit

the plate in the groove in the jig and the jig

in the clincher unit completely.

Tighten the four screws for each clincher.

Rotate the stapler gears upwards to

remove the jig.

Caution: When removing the jig, be care-

ful not to break the myler of the

Remove the cartridge, detach the plate,

insert the staple plate slide out on step3,

and place the cartridge to its original posi-

Check that the stapler operates properly.

Chapters

Table of Contents