Minolta Di551 Service Manual page 283

FN-6 / FN-112
(7) Remove two screws, and further pull stacker unit
out.
CAUTION: Place something under the drawn
stacker unit to prevent the FNS from
falling due to the weight of the unit.
Screw
Stacker unit
Support preventing the falling of the FNS
(8) Remove two screws. Lift the stacker unit to
detach from the guide rail.
Screw
(9) Reinstall the above parts following the removal
steps in reverse.
CAUTION: Make sure that the hook in the guide
1-R-14
Caution:
Take care of your posture when servicing
to avoid damage to your back or other
joints.
1
2
3
4
5
3
1
1. Guide rail
2. Mounting hole
3. Unit
4. Screws
5. Stacker unit
rail is inserted into the mounting hole
of the stacker unit, and then tighten
the securing screw.
4