Minolta Di551 Service Manual page 403

Step Operation
Remove three screws to detach the clutch
replacement cover.
Clutch replacement cover
Screws
5
Remove twelve screws to detach the rear
cover.
6
Screws
Rear cover
Loosen two screws and adjust the position
for each up/down pulley using an adjust-
7
ment screw so that the front and rear of the
up/down plate are at the same height.
Fasten two screws securely for each up/
8
down pulley to fix its position.
Install the rear cover, clutch replacement
9
cover, front cover, and side cover (right).
3. LCT up/down plate horizontal adjustment of C-
404
Screws
a. Adjustment method
Screws
Step
Screws
1
2
3
4
2-106
1
2
3
4
1
2
3
1. Adjusting screws
2. Mark
3. Up/down plate
4. Screws
Operation
Lift the up/down plate up.
Open the top cover.
Loosen the two screws and adjust the posi-
tion using an adjustment screw and the
mark so that the front and rear of the up/
down plate are at same height.
Fasten two screws securely
ADJUSTMENT
4