Tray 1 Paper Size Setting Method - Minolta PAGEWORKS 20 User Manual

1. Using the Control Panel

Tray 1 Paper Size Setting Method

You can enter the tray1 paper size setting mode only from off-line.
1. Press the
On Line
2. Press the Tray1 Paper
mode.
3. Press the Select
paper size you want to specify.
4. Press the
Enter
An asterisk (*) appears at the right of the setting.
The printer returns on-line automatically.
The paper sizes displayed in the tray 1 paper size setting mode are
as follows.
ITEM
TRAY1 PAPER SIZE LETTER
- If the paper in tray 1 has been used up, reload the paper and the
printer resumes printing automatically.
- If you select
UNIVERSAL
spective of the paper size setting on the computer only when you
specify tray 1 as the paper source.
- If you select
JOB SEPARATION
source.
3-2
key to take the printer off-line.
key to enter the tray 1 paper size setting
key as many times as necessary to select the
key to save your selection.
FACTORY DEFAULT
, the printer feeds paper from tray 1 irre-
, tray 1 becomes the separator
USER SELECTION
LETTER, LEGAL,
LEDGER, EXEC, C5,
DL, MONARC, COM10,
A4, A3, A3+, B4,
JIS B5, ISO B5,
UNIVERSAL,
JOB SEPARATION