Minolta Di551 Service Manual page 381

ADJUSTMENT
Use the numeric keys to enter a numerical
value, then press the
14
Setting range: -128 to +127
1 step = 0.1 mm
Press the
COPY SCREEN
15
the Copy screen, and make a copy.
16 Confirm the position of the 2nd fold.
If the 2nd folding position is not properly set,
press the C button while holding down the
17
Utility key to return to the adjustment
screen.
Repeat steps 13 to 17 until the 2nd folding
18
position is correctly set.
5. Z-folding adjustment value
Deviance on
edge (a)
11 x 17 3.5 ±1.5
A3 3.5 ±1.5
8K 3.5 ±1.5
B4 3.5 ±1.5
8.5 x 14
Position of the 2nd fold
Note:
Length of the 1st fold is for standard
The length of the 2nd fold should be the adjustment value.
key.
SET
key to return to
Length of 1st
fold (b)
(108)
(105)
(97)
(91)
- -
Length of the 1st fold
a
b
Length of the 2nd fold
2-84
Unit (mm)
Length of 2nd fold (L) Length of 2nd fold (L)
adjustment value
212
206
191
178
258.6
Position of the 1st fold
L
standard value
Less than 215
Less than 209
Less than 194
Less than 181
Less than 261.6