Viewing Fault Details - Cisco CiscoWorks 1105 User Manual

Chapter 2 Fault Monitoring
Step 4
Step 5
Step 6

Viewing Fault Details

78-14947-01
To sort table data, click on the column heading you want to use to sort the data:
A triangle indicates ascending order.
•
An upside-down triangle indicates descending order.
•
• No triangle indicates that the data is not sorted.
To acknowledge (change the state from Active to Acknowledged):
• A single fault, select it, then click Acknowledge.
All faults, click Select All, then click Acknowledge.
•
To unacknowledge (change the state from Acknowledged to Active):
• A single fault, select it, then click Unacknowledged.
All faults, click Select All, then click Unacknowledged.
•
Related Topics
• Managing Profiles, page 2-7
Notification Settings, page 2-20
•
The following tables are displayed in the Fault Details window.
To sort table data, click on the column heading you want to use to sort the data:
• A triangle indicates ascending order.
An upside-down triangle indicates descending order.
•
No triangle indicates that the data is not sorted.
•
Fault details for
Table 2-3 Fault Details Table
Column
IP
Name
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Description
The device IP address.
The device hostname.
Displaying Faults
2-5