Cisco CiscoWorks 1105 User Manual page 141

Chapter 3 Configuring Devices
Table 3-24 11a Radio Advanced Settings (continued)
Field
Default Unicast Address Filter
Open
Shared
Network-EAP
Specified Access Point 1
Specified Access Point 2
Specified Access Point 3
Specified Access Point 4
Step 4 Select one of the following in the left pane:
•
•
•
78-14947-01
Preview to see your changes before you apply them. (See
Template, page 3-131.)
Finish to save the template. (See
Another template category to configure more options. (See
Categories, page 3-2.)
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Description
From the list, select one of the following:
Allowed—The access point forwards all
•
traffic except packets sent to the MAC
addresses set as disallowed with the
Address Filters.
Disallowed—The access point discards
•
all traffic except packets sent to the MAC
addresses set as allowed with the
Address Filters or on your authentication
server.
Select Disallowed for each
authentication type that also uses
MAC-based authentication.
If this access point is a repeater, enter the
MAC address of one or more root-unit access
points with which you want this access point
to associate.
With MAC addresses in these fields, the
repeater access point always tries to associate
with the specified access points instead of
with other less-efficient access points.
Finishing the Template, page
Using the Templates
Previewing the
3-132.)
Template
3-87