Cisco CiscoWorks 1105 User Manual page 340

Using Discovery and Managing Devices
To add a LEAP server:
Step 1
a.
b.
Text Box
Server Name
Server Port
Username
Password
Secret
c.
Step 2 To modify a LEAP server:
a.
b.
c.
To remove a LEAP server:
Step 3
a.
b.
For information on setting the polling interval and response time fault thresholds
Step 4
for LEAP servers, see
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-34
Select Administration > Discover > LEAP SERVER > Add Server. The
LEAP Server: Add Server dialog box appears.
Complete the following:
Description
Name or IP address of the AAA server.
Port on the server that is used for authentication; this is
always 1645.
Client username that you entered on the AAA server.
Client password that you entered on the AAA server.
Shared secret key that you entered on the AAA server.
To add the server, click Submit. To clear all data from the textboxes, click
Reset.
Select Administration > Discover > LEAP Server > Modify Server. The
LEAP Server: Modify Server dialog box appears.
Select a server from the Server Name list, and enter data as described in
Step 1.
Click Submit.
Select Administration > Discover > LEAP Server > Remove Server. The
LEAP Server: Remove Server dialog box appears.
From the list, select the server you want to remove, then click Submit.
Specifying Fault Thresholds, page
Chapter 6 Performing Administrative Tasks
2-15.
78-14947-01