Cisco CiscoWorks 1105 User Manual page 182

Using the Templates
Table 3-41 Event Handling Settings (continued)
Field
Maximum Number of Bytes
Stored per Alert Packet
(0- 2312)
Maximum Memory Reserved for
Detailed Event Trace Buffer
(bytes) (0-8388608)
Select one of the following in the left pane:
Step 3
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-128
Preview to see your changes before you apply them. (See
•
Template, page 3-131.)
Finish to save the template. (See
•
• Another template category to configure more options. (See
Categories, page 3-2.)
Chapter 3
Description
Enter the maximum number of bytes the
access point stores for each Station Alert
packet when packet tracing is enabled.
If you use 0, the access point does not store
bytes for Station Alert packets; it only logs
the event.
Changing this setting may cause the
Note
access point to reboot.
Enter the number of bytes reserved for the
Detailed Event Trace Buffer.
The Detailed Event Trace Buffer is a tool for
tracing the contents of packets between
specified stations on your network.
Note Changing this setting may cause the
access point to reboot.
Finishing the Template, page
Configuring Devices
Previewing the
3-132.)
Template
78-14947-01